details
1. The paper cutting machine shall cut the whole roll or the whole sheet of raw materials in a fixed length, such as plastic packaging materials, packaging boxes, steel plates, film, leather, wood chips, etc., all of which shall be operated with a fixed length.
2. The cutting length can be set successively. If the practical cutting length has error, it can be calibrated simply by setting parameters.
3. Paper cutting machine can be divided into static and dynamic cutting operation: stop the machine accurately when the length is set, and then the machine can be processed statically, and start up again after cutting. When the set length arrives, the cutting signal is announced without stopping, and the cutting machine is dynamically cutting during data movement.
4. The cutting machine is a pre-press and post-press equipment for cutting large rolls of paper, film, non-woven cloth, aluminum foil and mica tape into small rolls of different widths, which is often used in paper making machinery and printing and packaging machinery.
Recommend information
- 18-09-15Characteristics and application of tape slitter
- 18-09-15Domestic cutting machine development three aspects
- 18-09-15The difference between slitting machine and cross-cutting machine
- 18-09-15Application method of compound machine
- 18-09-15Introduce what is paper cutting machine
- 18-09-15What is the use of paper cutting machine?
- 18-09-15What are the operation requirements of the cutting machine?
- 18-09-15What is the mechanism of the paper cutting machine?
- 18-09-15The operation engineering of compound machine equipment will be explained one by one
- 18-09-15What are the reasons for the brittle seal of the cutting machine? What's the problem?